Sony TC-K333ESG Stereo Cassette Deck

This product is missing a good quality picture. You can provide a picture taken by you from your own deck, or send us scanned picture of this deck taken from the original manufacturer brochure by clicking this text.

Mail Us!

The Sony TC-K333ESG is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction, it was introduced by Sony in 1989.

The main features of the Sony TC-K333ESG are: 3 heads and off-tape monitoring, electronic linear tape counter with 4 digits and memory stop, automatic tape type selection with support for normal, chrome and metal tapes, dual capstan transport.

Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well.

Level meters used on the TC-K333ESG are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the TC-K333ESG let it respond to the slightest finger contact for fast and effortless transport function selection.

To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.

Dolby C-type used in the TC-K333ESG provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. To further maintain recording accuracy, the TC-K333ESG incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the TC-K333ESG can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.

For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.