The main features of the OTTO RD-D65 are: 2 heads, analog 3 digit tape counter, manual tape type selection with support for normal, chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the RD-D65 are analog needle VU reading meters. Full-logic transport controls used on the RD-D65 let it respond to the slightest finger contact for fast and effortless transport function selection.
The Dolby-B system reduces tape hiss on tapes recorded on the RD-D65 by as much as 10 dB at the highest frequencies. The Sanyo Super-D noise reduction system is a compander circuit intended to compress and expand the audio signal to reduce noise. In the RD-D65 It operates in two divisions, medium low band and medium high band.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Copying product information from this page and use it in your auction or on your website is allowed only if you submit a picture of the OTTO RD-D65 to us. This picture has to be made by yourself, showing the deck with its entire front and containing no watermarks or logos. In case we discover that you copied OTTO RD-D65 content without sharing images in return then you give us the right to use the content on the page where you used our OTTO RD-D65 information.