Harman Kardon TD4600 Cassette Deck

The Harman Kardon TD4600 is a stereo cassette deck with Dolby B/C/S and HX-Pro noise reduction, it was introduced by Harman Kardon in 1990 with a manufacturer suggested retail price of USD $749 and discontinued 4 years later in 1994.

The main features of the Harman Kardon TD4600 are: 2 heads, electronic linear tape counter with 4 digits, automatic tape type selection with support for normal, chrome and metal tapes, belt driven single-capstan transport.

Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.

Level meters used on the TD4600 are generic digital peak reading meters. Full-logic transport controls used on the TD4600 let it respond to the slightest finger contact for fast and effortless transport function selection.

To ensure the best response from the wide variety of tapes available adjustment of, sensitivity, to optimum levels can be performed prior to recording.

Dolby S-type noise reduction gives cleaner transient response, provides lower noise levels, both at low and high frequencies, and allows higher signal levels to be recorded safely on the TD4600. Dolby S-type noise reduction provides 24 dB of high frequency noise reduction plus an additional 10 dB of low frequency noise reduction. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. To further maintain recording accuracy, the TD4600 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the TD4600 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.

For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wireless remote control.

• CD Transcription Quality
• Isotropic Head