The main features of the Aurex PC-X88AD are: 3 heads and no off-tape monitoring to save production cost, analog 3 digit tape counter and memory stop, tape type selection with support for normal, chrome, ferro-chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the PC-X88AD are analog needle VU reading meters. Full-logic transport controls used on the PC-X88AD let it respond to the slightest finger contact for fast and effortless transport function selection.
The Dolby-B system reduces tape hiss on tapes recorded on the PC-X88AD by as much as 10 dB at the highest frequencies. The Toshiba Adres noise reduction system used in the PC-X88AD expands the tape playback dynamic-range greatly right across the frequency range reaching an incredible 100dB at 1kHz. Signal-to-noise ratio is improved dramatically: by 30dB at 10kHz eliminating all tape hiss, and 17dB at 100Hz.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
Copying product information from this page and use it in your auction or on your website is allowed only if you submit a picture of the Aurex PC-X88AD to us. This picture has to be made by yourself, showing the deck with its entire front and containing no watermarks or logos. In case we discover that you copied Aurex PC-X88AD content without sharing images in return then you give us the right to use the content on the page where you used our Aurex PC-X88AD information.