The main features of the Arcam Delta 100 are: 3 heads and off-tape monitoring, electronic linear tape counter with 4 digits and memory stop, tape type selection with support for normal, chrome and metal tapes, belt driven dual-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Delta 100 are generic digital peak reading meters. Full-logic transport controls used on the Delta 100 let it respond to the slightest finger contact for fast and effortless transport function selection.
Dolby S-type noise reduction gives cleaner transient response, provides lower noise levels, both at low and high frequencies, and allows higher signal levels to be recorded safely on the Delta 100. Dolby S-type noise reduction provides 24 dB of high frequency noise reduction plus an additional 10 dB of low frequency noise reduction. To further maintain recording accuracy, the Delta 100 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the Delta 100 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. All main transport commands can be issued remotely with a wireless remote control.
Copying product information from this page and use it in your auction or on your website is allowed only if you submit a picture of the Arcam Delta 100 to us. This picture has to be made by yourself, showing the deck with its entire front and containing no watermarks or logos. In case we discover that you copied Arcam Delta 100 content without sharing images in return then you give us the right to use the content on the page where you used our Arcam Delta 100 information.