The main features of the Alpage AL-60 are: 2 heads, electronic linear tape counter with 4 digits, manual tape type selection with support for normal, chrome, ferro-chrome and metal tapes, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the AL-60 are generic digital peak reading meters. Full-logic transport controls used on the AL-60 let it respond to the slightest finger contact for fast and effortless transport function selection.
Dolby C-type used in the AL-60 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. To further maintain recording accuracy, the AL-60 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the AL-60 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
Copying product information from this page and use it in your auction or on your website is allowed only if you submit a picture of the Alpage AL-60 to us. This picture has to be made by yourself, showing the deck with its entire front and containing no watermarks or logos. In case we discover that you copied Alpage AL-60 content without sharing images in return then you give us the right to use the content on the page where you used our Alpage AL-60 information.