The main features of the Aiwa AD-M200 are: 2 heads, analog 3 digit tape counter, manual tape type selection with support for normal, chrome and ferro-chrome tapes with additional manual equalization selection, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well which is opened by a damped mechanism.
Level meters used on the AD-M200 are analog needle VU reading meters. Mechanical transport controls for reliable AD-M200 transport function selection. Cue and review can be used to easily and quickly locate the beginning of a passage.
The Dolby-B system reduces tape hiss on tapes recorded on the AD-M200 by as much as 10 dB at the highest frequencies. To further maintain recording accuracy, the AD-M200 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the AD-M200 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
To make live recordings this deck has 2 microphone inputs to connect microphones with a jack connector. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
Copying product information from this page and use it in your auction or on your website is allowed only if you submit a picture of the Aiwa AD-M200 to us. This picture has to be made by yourself, showing the deck with its entire front and containing no watermarks or logos. In case we discover that you copied Aiwa AD-M200 content without sharing images in return then you give us the right to use the content on the page where you used our Aiwa AD-M200 information.